Renesas M3A-0040 Instruction Manual

6, 1 1. Summary The M3A-0040 is an evaluation board for the Renesas Hi-Speed USB ASSP R8A66597FP. Two USB-A receptacles are mounted on the board for evaluation of USB host operations using USB port0 and USB port1 of R8A66597. CN1 can be used for evaluation of USB peripheral operations. Pl…

2, Notice 1. All information included in this document is current as of the date this document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please confirm the latest product informatio…

9, 4 5. Setup The board combined with this board (M3A-0040) is called a target board in the description below. This section illustrates how to use this board with a target board to connect to a USB device. 5.1 Using with M3A-0033 M3A-0033 is the Renesas USB ASSP Evaluation Motherb…

4, 1. This document is provided for reference purposes only so that Renesas customers may select the appropriate Renesas products for their use. Renesas neither makes warranties or representations with respect to the accuracy or completeness of the information contained in this…

10, 5 5.2 Use with other boards The R8A66597FP corresponds to a separate bus mode and multiplex bus mode. Switch SW1 of the M3A-0040 according to MCU use. Below are notes for target board design. 5.2.1 Notes for target board design (1) The receptacle of the target board shoul…

11, Renesas M3A-0040 6 5.2.4 Multiplex bus mode Switch SW1 of the M3A-0040 board to “MULT” when using as multiplex bus mode. Use D1/AD1-D7/AD7 of CN2 as address line share with data line. Keep open A1-A6 of CN3. Use #21-pin (A7/ALE) of CN3 as ALE. 5.3 Using M3A-0040 as a peripheral When the M3A-0040…