Resol DeltaSol MX Manual 

7, en 7 2.3 Data communication / Bus The controller is equipped with the RESOL VBus ® for data transfer with and energy supply to external modules. The connection is carried out at the two terminals marked VBus and VBus / GND (either po- larity). One or more RESOL VBus ® modules c…

46, en 46 Twin pump The Twin pump function controls the equal distri- bution of pump runtime in systems with two equally usable pumps. If the allocated relay has exceeded its adjusted run- time and the next switch-on process is imminent, the reference relay is switched on instead. All char…

81, en 81 AM1 Alarm module The AM1 Alarm Module is designed to signal system failures. It is to be connected to the VBus ® of the con- troller and issues an optical signal via the red LED if a failure has occurred. The AM1 also has a relay output, which can e. g. be connected to a building manag…

54, en 54 Solid fuel boiler Arrangement / Opt. functions / Add new function / Solid fuel boiler Adjustment channel Description Adjustment range / selection Factory setting Relay Relay selection system dependent system dependent Sen. Boiler Solid fuel boiler sensor selection syst…

31, en 31 System 9 variant 3 Relay / sensor allocation 1 2 3 4 5 6 7 8 9 10-14 Relay Solar pump tank 1 Solar pump tank 2 Solar pump tank 3 Solar pump tank 4 Solar pump tank 5 Optional function Optional function Optional function Optional function Optional function Sensor Collector 1 Tank…

39, Resol DeltaSol MX en 39 CS bypass Adjustment channel Description Adjustment range / selection Factory setting Collector Collector fi eld system dependent system dependent Irrad. Switch-on irradiation 100 ... 500 W / m² 200 W / m² Delay Delay time 10 ... 300 s 120 s Stmax off Stmax switch-on suppression Y…