Response Electronics GSM AD05 Instruction Manual

2, Installation How to install the Auto Dialer 1. Mark and drill two holes on a horizontal line 160mm apart. 2. Insert the masonry plugs; screw the two fixing screws in the plugs leaving 2mm protruding. 3. Run a cable from the Alarm Control Panel to the Auto D…

1, Response Electronics GSM AD05 GSM AD05 Slave GSM Auto Dialer- Instruction Manual Please read these instructions before you start the installation Features • LCD display • Programmable 9 x 32 digit phone numbers for each trigger. • 10 second duration recordable message for each trigge…

6, Programming Guide How to set Trigger Delay/Arm Delay times: (Default both set at 0 seconds, instant) Set trigger delay time between 30 and 60 seconds: This is the delay time between a trigger being activated and the time the dialer starts to dial out. Default setting is 0 secon…

7, Programming Guide How to stop the dialer dialing the telephone numbers in sequence : Quick guide: When the phone is answered, press <#> or <*> on the telephone keypad to stop the dialing sequence. When the Auto Dialer starts dialing, it will dial the first tele…

3, Programming Guide How to program the Auto Dialer (if no key is pressed for 30 seconds, the dialer will automatically exit the programming mode.) IMPORTANT: THE SYSTEM MUST BE IN THE OFF MODE FOR ALL PROGRAMMING. SINCE THE DIALER WILL AUTOMATICALLY TURN ITSELF ON WHEN POWER IS FIRS…