Riverstone Networks RS 2000 Getting Started Manual

88, 5-6 Riverstone Networks RS 2000 Getting Started Guide Loading Software from the Network Managing RS 2000 Software Here is an example: 6. Enter the set command to view the changes: Here is an example: 7. From the Boot prompt, use the ping command to verify that the RS 2000…

14, xiv Riverstone Networks RS 2000 Switch Router Getting Started Guide DECLARATION OF CONFORMITY ADDENDUM  "() E$/00D/55# ,0/ 0/55# * " +  �…

24, 2-2 Riverstone Networks RS 2000 Switch Router Getting Started Guide Specifications RS 2000 Introduction 2.2 SPECIFICATIONS The RS 2000 provides high-speed switching and full non-blocking throughput. The hardware provides high-speed performance regardless of the performance monitoring,…

53, Riverstone Networks RS 2000 Switch Router Getting Started Guide 3-5 Hardware Installation Installing the Hardware Figure 3-5 Installing the extended EMI face plate 8. Insert the line card from the top and ensure that it makes maximum surface contact with its face plate. 9. Line up the t…

31, Riverstone Networks RS 2000 Riverstone Networks RS 2000 Switch Router Getting Started Guide 2-9 RS 2000 Introduction Hardware Overview 2.4 HARDWARE OVERVIEW This section describes the RS 2000’s hardware specifications. For information about installing the chassis and line cards, see Chapter 3, "…