RoboBuilder DIY Robot kit Operation & User’s Manual

43, RoboBuilder DIY Robot kit 44 STEP 06 ID 01 ID 02 ID 03 Connect wCK cables as above before attaching leg cover. Left ⑪ ①② : B16, ③④⑤⑥⑦⑧⑨⑩ : B40, ⑪ : B12 ⓐ : J6 ⓐ ID 02 ID 03 STEP 05 Left ①② : B16 ⓐ : J7, ⓑ : J4 ① ② ⓐ ⓑ ③ Right ①② : B16 ⓐ : J7, ⓑ : J4 ① �…

9, 10 KIT Part List The Parts included in a RoboBuilder kit are as follows: wCK module ×16 Body Frame ×1 Chest Cover ×1 Foot Part ×2 Hand Part ×2 Head Part ×1 (Sensor Module) wCK module Cable ×20 J2 ×8 J1 ×2 J3 ×3 Control Box ×1 Leg Cover ×2 B5 ×12 B16 ×24B12 ×17 B8 ×15 Nut ×84 B…

13, 14 Play Guide KIT Models Below are the RoboBuilder kit models available for order : Model wCK Module Color Sound Recognition Speaker Degree of Freedom Actuator Torque Distance Sensor LED on Actuator CREATOR 5710K Black Y N 16 8kg·cm-12 EA 11kg·cm-4 EA N N CREATOR 5720T-S02 Transp…

67, 68 Software Components The RoboBuilder software consists of MotionBuilder and the RBC Upgrade tool. MotionBuilder is used to create and modify robot files, transfer robot files to RoboBuilder, and adjust the home posture. RBC Upgrade tool is used to upgrade the firmware of the main…

34, 35 Chapter 2. Assembling RoboBuilder Right Arm Head Left Arm Right Leg Left Leg ID 11 ID 14 ID 12 ID 15 STEP 19 With the control box half slid down, insert the cables from both legs to the connectors on the control box before the con- trol box is fully pushed down a…

71, 72 Setting Robot Platform Appropriate platform type(HUNO, DINO, DOGY) should be set on the control box before connecting RoboBuilder with a PC. For example, it your robot is a HUNO but control box is set as DOGY platform, the robot won’t operate properly. Robobuilder will think the robot is …