master mechanic 176578 Owner's Manual

14, 14 PREPARING SCREW HOLES It is important to prepare screw holes before attempting to fasten two pieces of wood together. Proper preparation will make screws drive easier and prevent misaligned components, stripped screw heads, splitting and separati…

9, 9 This symbol designates that this tool is listed with U.S. requirements by ETL Testing Laboratories, Inc. Conforms to UL Std. 60745-1, and 60745-2-2. 3042597 JD507420 V Volts A Amperes Hz Hertz W Watts kW Kilowatts Microfarads L Litres…

1, 20 VOLT LI-ION IMPACT DRIVER 176578 Owner’s Manual Manufactured For and Distributed By True Value ® Company, Chicago, IL ©2014 True Value Company Made in China PRODUCT SPECIFICATIONS IMPACT DRIVER …

15, 15 Fig. 13 Fig. 14 DRIVING SCREWS – cont’d 5. While holding the screwdriver firmly against the screw with both hands and the bit aligned with the screw, squeeze the trigger switch and drive the screw. 6. When the screw is driven to the correct depth, rel…

16, master mechanic 176578 16 REMOVING NUTS 1. Press the forward/reverse button to the RIGHT for removing nuts (Fig. 7). 2. Place the socket fully onto the nut. 3. Hold the nut driver socket and impact driver firmly against the nut with both hands. With the nut driver aligned with the nut, squee…

6, 6 Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury. Do not overreach. Keep proper footing and balance at all times. This enables better cont…