KOBE CH8136SQ Installation Instructions And Operation Manual

8, 6 Figure 5 Ductwork Installation 5. Use 6” round pipe to connect the plastic exhaust on the hood to the ductwork above. Use duct tape to make all joints se…

12, 10 To Replace Light Bulb CAUTION: HALOGEN LIGHT UNIT MAY BE HOT! WAIT UNTIL UNIT IS COOL. 1) Make sure all control switches are off, and range hood is unplugged. 2) Use a flat head screwdriver to pop out the protective covering as shown on Figure 13. 3) Gently p…

19, 17 WARRANTY WARRANTY CERTIFICATE KOBE Range Hoods, Inc. warrants all products manufactured or supplied by it to be free from defects in workmanship and materials. Its obligations pursuant to this warranty are limited to a period of two years from the date of purchase an…

13, KOBE CH8136SQ 11 SPECIFICATIONS MODEL / SIZE CH8136SQ / 36” COLOR # 304 Commercial Grade Stainless Steel VOLTAGE 120V 60Hz NUMBER OF MOTORS 2 DESIGN 20-Gauge / Satin Finish FAN TYPE Twin Turbine Impeller EXHAUST 6” Round 7” Round Adapter (Included) CONTROLS …

3, 1 IMPORTANT SAFETY INSTRUCTIONS - PLEASE READ THIS SECTION CAREFULLY BEFORE INSTALLATION - WARNING – TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PERSONAL INJURY, OBSERVE THE FOLLOWING: 1) Installation and electrical wiring must be done by qualified professionals and…