nilan CTS 602 Manual, Installation Instruction

23, This document may be subject to change Side 23 of 27 Modbus Options that flash are indicated by ” ” On the CTS602 control panel, press: - ESC to return to the previous menu - qp to scroll upwards or downwards through the menus or to adjust the setting of an activated me…

8, This document may be subject to change Side 8 of 27 Heating surface, water  Connecting the heating surface must be done by an authorized plumber.  If the unit is placed outside or in a cold location the installation must frost secured. The heating unit is delivere…

21, This document may be subject to change Side 21 of 27 Preset ” ” indicates that the menu point flashes and can be set to another value Use of t he CTS 600 panel : - pr ess ESC t o go one st ep back i n t he menu - pr ess qpt o move up or down …

16, This document may be subject to change Side 16 of 27 Defrost In the ”Defrost” menu it is possible to chose how the unit should perform during defrosting of the evaporator in the exhaust. ” ” indicates that the menu point flashes and can be set to another value Use of…

26, This document may be subject to change Side 26 of 27 VPL 25 1: Udeluft, Fresh Air, Aussenluft, Air neuf 2: Tilluft, Air Inlet, Zuluft, Air pulse 3: Fraluft, Air Exhaust, Abluft, Air repris 4: Afkastluft, Air Discharge, Fortluft, Air extrait 11: …

24, nilan CTS 602 This document may be subject to change Side 24 of 27 Assambling By assembling the T10/RH must be moved CV T10/RH T10/RH FU Unit Air Exhaust Important! When montaging the VPL15 with the Fu15 the T10/RH has to be moved as it is shown on the sketch. It is important that the …