Sanav GC-101 Operation & User’s Manual

24, Sanav GC-101 24 5.11 Set up Router for Transmitting Data by URL/IP or E-mail You can choose the router to transmit the data by URL/IP, E-mail or SMS message,. Please refer to the following table for setup the router. The table 5.11.1 describes the meaning of each segment in the message above. Table 5.1…

25, 25 The table 5.11.2 shows each confirmation message reply after setup. Table 5.11.2 Situation Message Reply [username] + Device is switching to HTTP/SMS mode [username] + Device is switching to Mail/SMS mode [username] + Device is switching to HTTP mode [username] + Device is sw…

34, 34 5.18 Input TCP/IP Address This function is to input TCP/IP address for TCP transmission. Please note that data will only be uploaded to this TCP/IP address when TCP transmission mode is selected. The SMS command is as following: Setup format：#「username」,「Password」,「Func…

27, 27 5.13 Deactivate Panic Mode In this function, it helps you to deactivate panic mode forcedly. The SMS command is as following: Setup format：#「username」,「Password」,「Function Code」* Example：#username,0000,offpanic* The table 5.13.1 describes the meaning …

11, 11 4. Easy Start All the settings are done by SMS. Please use your cellular phone to send the following SMS to GC-101 to start experiencing it. 1. Request for the imei code of GC-101. If the command has been transferred successfully, GC-101 will send an imei code to your cell…

45, 45 6.4 Move Report 6.4.1. Uploading park alarm data to URL when GPS is fixed When execute the Auto Report according to the settings with a GPS fixed, GC-101 will upload the data to your URL. The data format will be like the following. Format: URL?imei=IMEI,RMC=GPRMC,Mov…