Sartorius la series Operating Instructions Manual

15, 15 Configuring the Balance Step Key (or instruction) Display/Output 10. Display other user data Press the q soft key – Lot number repeatedly – Weight set ID – Calibration weight – Time – Date – Display contrast – Password – ID code – Three calibration/ adjustment times 11…

52, 52 Practical Example Determining an Unknown Piece Count; Weighing in the Preset Reference Sample Quantity Settings (changes in the factory settings required for this example): Setup: App: Application 1: Counting: Average piece weight updating: Manual Setup: App: Basic settings: Printout config…

161, Overview 161 Index Page Accessories (options) 152 Acoustic signal 111 Additional functions (balance menu) 111 Animal weighing 57 Antitheft device 11 Application filter 30 Application programs 48 Applications menu 17 Applications, combining 113 Applications, configuring 17 Auto print fun…

79, Operating the Balance 79 Preparation The checkweighing program often requires a target value for comparison with the current value. This target has a tolerance range, which is defined by absolute weight values. The tolerance range is defined as either an absolute value or a percentage wit…

148, 148 Model LA34000P LA12000P LA34 Readability g 0.1/0.2/0.5 0.1/0.2/0.5 1 Weighing capacity g 8,000/16,000/ 3,000/6,000/ 34,000 34,000 12,000 Tare range (subtractive) g – 34,000 – 12,000 – 34,000 Repeatability (standard deviation) ≤±g 0.1/0.2/0.5 0.1/0.1/0.3 0.5 Linearity ≤±…

70, Sartorius la series 70 Equations Used to Determine Density: Buoyancy: Rho = (Wa x (Rhofl – LA)) ÷ ((Wa – Wfl) x Corr) + LA For the buoyancy method, a factor of 0.99983 (factory setting) is used to allow for the buoyancy caused by the bars of the sample holder of the YDK 01 (LP) Density Determin…