sauter EY-RU482F001 Manuallines

9, © Fr. Sauter AG Im Surinam 55 CH-4016 Basel Tel. +41 61 - 695 55 55 Fax +41 61 - 695 55 10 www.sauter-controls.com [email protected] Printed in Switzerland 9/9 P100002807 A Hardware input is not reading the correct value Input wiring problem Check that the wiring is correct according to…

1, EY-modulo 4 1/9 P100002807 A en Guidelines for the electrician Product Description1 This document describes the hardware installation procedures for the SAUTER EY-modulo4 room operation units with display for Variable Air Volume applications (VAV) and Balancing Tool and for Fan Coil applicat…

5, 5/9 P100002807 A B11649 Smart Sensor with front plate removedFig. 2 Wiring EY-modulo4 Room Operating Unit to a Controller 5.1 The EY-modulo4 Room Operating Unit uses a serial communication protocol and is designed to connect to the serial inputs labelled SMRT+ and SMRT-on the VAV…

8, sauter EY-RU482F001 8/9 P100002807 A If the distance between the EY-modulo4 Room Operating Unit and the controller (stub length) is less than 3m a bus topology should be used. If the stub length is greater than 3m a free topology in a daisy chain must be used. The communications jack for both the EY-modu…

2, 2/9 P100002807 A The modern, sleek profile enclosure is suitable for classrooms, hotels, executive areas, office spaces & other commercial areas. Mounting hardware with a separate sub-base is provided with the device for installation on dry wall or on a electrical junction box.…