Schumacher SE-2254 Owner's Manual

11, • 11 • The Chart Method Use the following table to more accurately determine the time it will take to bring a battery to full charge. First, identify where your battery ts into the chart. CCA = Cold Cranking Amps RC = Reserve Capacity Ah = Amp Hour NR means that the charger setting is NOT RE…

2, • 2 • IMPORTANT: READ AND SAVE THIS SAFETY AND INSTRUCTION MANUAL. SAVE THESE INSTRUCTIONS – This manual will show you how to use your charger safely and effectively. Please read, understand and follow these instructions and precautions carefully, as this manual contains important safety…

6, • 6 • PARTS TOOLS NEEDED (2) 10-32, thread cutting screws (4) ¼-20, thread cutting screws (4) Phillips head sheet metal screws (2) wheels (1) axle (2) axle caps (2) axle brackets (1) handle (1) foot 3/8" wrench (for mounting foot) 5/16" wrench (for mounting wheels) 1/4" w…

1, Schumacher SE-2254 0099001275-00 Manual Battery Charger Cargador de Batería Manual Models / Modelos: SE-2254, SE-2352, SE-3000, SE-3612, SE-4020, SE-4022, SE-5025, SE-6030, SE-8050 READ THE ENTIRE MANUAL BEFORE USING THIS PRODUCT. FAILURE TO DO SO COULD RESULT IN SERIOUS INJURY OR DEA…

8, • 8 • Battery Load Tester Switch (Model SE-8050 only) When testing a battery, use this switch to apply a load to it. Battery Tester Switch (Models SE-2254 and SE-4022 only) When testing a battery, use this switch to select between testing a 6 volt battery and testing a 12 volt …

5, • 5 • 7.3 Connect the POSITIVE (RED) charger clip to the POSITIVE (POS, P, +) post of the battery. 7.4 Position yourself and the free end of the cable you previously attached to the NEGATIVE (NEG, N, -) battery post as far away from the battery as possible – then connect the NEGA…