Seagull Models SEA FURY Assembly Manual

22, SEA FURY. Instruction Manual. 22 ! 1) Using a ruler and a pen, locate the centerline of the horizontal stabilizer, at the trail- ing edge, and place a mark. Use a triangle and extend this mark, from back to f…

19, SEA FURY. Instruction Manual. 19 Trim and cut. 1mm. ! 2) While keeping the back edge of the cowl flush with the marks, align the front of the cowl with the crankshaft of the engine. The front of the cowl should be positioned so the crankshaft is in nearly the middle of the …

29, Seagull Models SEA FURY SEA FURY. Instruction Manual. 29 PREFLIGHT CHECK. ! 1) Completely charge your transmitter and receiver batteries before your first day of flying. ! 2) Check every bolt and every glue joint in the SEA FURY to ensure that everything is tight and well bonded. ! 3) Double ch…

2, SEA FURY. Instruction Manual. 2 INTRODUCTION. Thank you for choosing the SEA FURY ARTF by SEAGULL MODELS. The SEA FURY was designed with the intermediate/advanced sport flyer in mind. It is a semi scale airplane …

10, SEA FURY. Instruction Manual. 10 Attach a servo lead to the flap servo. Attach the string to the servo lead and carefully thread it though the wing. Once you have thread the lead throught the wing, remove the string so it c…