SEESTATION SS-C4457AV2 Series Operation & User’s Manual

5, Auto Zoom Speed Control Control speed auto-adjusted according to zoom length changing 2 Points Scan Set Freely 2 Points Scan Speed 1－64 grade available Dwell Time(2 Points scan) 1－60s Available Preset Positions 128 Running to Preset Speed: 0.5º-280° Cruise Tour: 4G…

24, 24 89 Start Two point Scan high speed 92 Set two point scan start point Clear Alarm 93 Set two point scan end point 95 Enter into amera menu 96 360ºScan slow speed Cursor(up) 97 360º Scan middle speed Cursor(down) 98 Start the second group preset (1-16prese…

2, SEESTATION SS-C4457AV2 Series Safety Attention Notes  Please read the instructions thoroughly before installing or operating the unit.  Please do not put the machine on an unstable table or mounting bracket.  Please prevent all liquids or other contaminating material from entering into…

20, The dome turns to Setup automatically without any command in XX seconds. Note: Both of the Control keyboard and the Dome should adopt Sapling protocol in the above settings. If the keyboard is set as PELCO-D or PELCO-P protocol, the Dome should be set the same. Calling and setting preset …

23, Improper protocol Correction flickering indicator, out of control Wrong connection of RS485 bus Check Mechanical failure Repair Camera incline Correction Self-inspection halt, buzz after image appears Power shortage Replacement Bad contact of video line Correction Unstable image …

18, V Functions and Operations This section briefly introduces the main functions and common operation principles without dwelling on details. Operation methods vary from different systems following the manufacturer’s manual. When unusual operations require sometimes, please turn t…