Seiwa BB 50 Operation & User’s Manual

12, 14 User Manual Fig. 2.2.1 - Fish Finder page selection by Menu NOTE On 10.4 Model: [DATA] + "FISH FINDER" + [ENTER] On 12.1 Model: [PAGE] + "FISH FINDER" + [ENTER] The screen is shown in the following figure: Fig. 2.2.1a - Fish Finder page selection by Menu On 10.…

4, 6 User Manual Important Information CAUTION ♦ Please read through this manual before the first operation. If you have any questions, please contact the Company's customer service or your local dealer. ♦ The BB 50/200 is not built water proof. Please make sure to avoid water intrus…

35, Seiwa BB 50 37 User Manual 6. Frequently Asked Questions 6.1 How can I disconnect the cables from the BB 50/200 in case I need to do so for the installation? ♦ Open the BB 50/200 box unscrewing the four screws (see the following figure). Fig. 6.1 - The BB 50/200 (I) ♦ Once the screws are removed, pu…

20, 22 User Manual bottom visible in the lower left of the screen. In this mode, Shift is always set to 0. In Bottom Lock Mode the Fish Finder automatically tracks the range around the bottom specified by the Bottom Range value. [MENU] + "RANGE MODE" + [ENTER] 3.1.4 Depth Mode This option …

37, 39 User Manual conditions, user feeling and intended usage of the Fish Finder (e.g. fishing or cruising), anyway a good starting point is to select a full auto preset such as CRUISE or FISH and then, after waiting a while to allow the echogram displayed to stabilize around the auto calculated…

21, 23 User Manual are related to the Frequency selected. [MENU] + "SENSITIVITY" + [ENTER] Fig. 3.1.12 - Fish Finder Sensitivity menu NOTE The Frequency value is only displayed: to select the desired frequency see the previous Par. 3.1.11. 3.1.12.1 Frequency This option is av…