Sky SKYLAM 1120 Owner's Manual

8, Cold Laminating for SKYLAM 1120 ( Hot & Cold ) SKYLAM 1120 / 720 / 380 3. Turn the power switch on. Power switch is located in the rear of the unit. 4. Remove the Safety Cover. 5. Remove the Guide Table. SKY 6. Pull down the top film through the Idle Bar_Top and …

9, Sky SKYLAM 1120 7. Pull up the bottom film through the Idle Bar_Bottom and attach it on the top film of top roller. 8. Set the Safety Cover and Guide Table. 9. Set the temperature and Speed 10. Align the material on the guide talbe and push the foot switch. 11. After the laminatined material pass…

6, SKYLAM 1120 / 720 / 380 11 10 1. TEMP ▲▼ : Adjust temperature. 2. SPEED ▲▼ : Variable speed from 1~9. reached. 3. STBY : Temperature is set to 85℃. 10. Rollers are running. 3. MEAS : Measures actual roller temperature. 11. Fans are running. 4. STOP : Stops rollers …

11, Curled lamination a. Upward curl a. Loosen the top roll film tension. b. Downward curl b. Loosend the bottom roll film tension. d. Blown main power fuse. d. Replace the fuse. a. Emergency switch is engaged. Unclear lamination a. The main roller temperatures are too low and laminatio…

4, SKYLAM 1120 / 720 / 380 WARNING : The laminator should be installed by a trained service technician. filed with the delivering carrier immediately upon receipt. The laminator should be located in an area with adequate work space for feeding graphics and lamination materials. Avoid p…

3, SKYLAM 1120 / 720 / 380 SKY Upon receipt your laminator, please inspect the box, the machine and all other contents for shipping damage. Damage should be brought to the immediate attention of the delivering carrier Please read the instructions carefully and keep this man…