Smarty BX1000 Plus Operation & User’s Manual

8, INSTALLATION 1. Insert the SD memory card into the SD card slot. Please make sure to disconnect the power cable when inserting or ejecting the SD memory card. 9 Park your vehicle on a flat level surface. Turn off the engine before installing the BX1000 / BX1000 Plus. 2. Attach the B…

4, GPS Reception 1. Activate the product in an area without large buildings to improve GPS reception. 2. The temperature range for optimum operation of the GP S receiver in your car is 0 ~ 45°C. 3. When using the product for the first time or after a long period (more than three days),…

11, OPERATION 1. Make sure that the power cable is properly connected and turn on the car power. 2. Blue LED & Red LED will be slowly blinking simultaneously and then Blue LED will remain on. Blue LED light means BX1000/BX1000 Plus is now ready for the event recording. 3. The event re…

29, LIMITED WARRANTY D-TEG Security Co., Ltd. (“D-TEG”) warrants this product against defects in material or workmanship for the time periods and as set forth below. Pursuant to this Limited Warranty, D-TEG will, at its option, (1) repair the product using new or refurbished parts …

10, Smarty BX1000 Plus FUNCTION Automatic start Connect your vehicle’s power cord to the BX1000/BX1000 Plus after starting the vehicle. Then BX1000/BX1000 Plus will be automatically started. (Use the provided power cord.) Event record The event recording will be automatically started by G-sensor. G-sensor sens…

19, Save JPG file & AVI file 9. Pause the playback and click ‘Save Image’ icon to make a JPG file. 10. Click ‘Save AVI’ icon to make a AVI file. ‘Save Image’ icon ‘Save AVI’ icon 20 …