Pitney Bowes relay 2000 Operator's Manual

55, Pitney Bowes relay 2000 OMR Scanning • 4 4-3SV63139 Rev.A Optical Mark Recognition (OMR) An OMR mark is normally a dark solid line on a sheet of light colored paper that is perpendicular to the direction of paper travel. This line must be thick and dense to trigger the OMR scanner. The OMR scanner works with the OMR…

70, 5 • Clear Material 5-4 SV63139 Rev. A Fold Plates - Remove and Replace To remove the fold plates: 1. Pull the two catches on the underside of the plate outward to release them. 2. Pull the plate straight out of the inserter. To replace the fold plates: 1. Pull the two catches (on t…

23, Program a Job • 2 2-5SV63139 Rev. A Program a Job Setup Mode 1. Open the hinged cover to the right of the display to access the setup buttons. 2. Press Setup. The inserter prompts for an access code. (This code prevents unauthorized personnel from changing inserter settin…

53, SV63139 Rev A 4 • OMR Scanning Contents Optical Mark Recognition (OMR)...........................4-3 Accuracy .........................................................4-3 OMR and Feeders on the Inserter .........................4-3 OMR Scanning Types ...........................…

29, Program a Job • 2 2-11SV63139 Rev. A Set Fold A 1. Select the size of the first fold required. NOTE: Depending on the settings you made earlier for fold type and paper length, the inserter suggests the correct dimension for the first fold. Most of the time this setting will prove satisfa…