Pitney Bowes relay 3000 Operator's Manual

14, 1 • System Overview 1-6 SV63140 Rev. A Control Panel Identification Use the buttons on the system control panel to set up and run jobs. The display screen shows the system status. 9 10 11 8 1 7 4 3 5 6 2 1 Clear Deck - Press to jog material through and out of the inserter. Also use i…

61, OMR Scanning • 4 4-5SV63140 Rev.A OMR Specifications The OMR mark must be a solid black line between 1pt and 2pts thick (0.014 inch (0.35mm) to 0.027 inch (0.7mm]) and at least 0.393 inch (10mm) wide. Each mark position must be evenly spaced, at least 0.118 inch (3mm) apart. The are…

69, Pitney Bowes relay 3000 OMR Scanning • 4 4-13SV63140 Rev.A Folding Example: For an A4 size sheet, the half fold measurement is 105mm. If the distance from the edge of the form to the middle of the scan dash marks is 10mm, the scanning head setting will be 95mm (105mm – 10mm). 105mm 10mm 10mm Locking Knob …

13, System Overview • 1 1-5 SV63140 Rev. A 4 Envelope Inverter - Transports the envelope into the stacker face up. 5 Drop Stacker or Output Device (not shown in image) - Located at the exit of the inserter, this device collects finished mailpieces. This device can be latched against…

2, Statement of FCC Compliance This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against interference when the equipment is operated in a commerc…