Plustek SmartOffice PL806 Operation & User’s Manual

44, Operation: < 16.5 W (when using ADF) < 15 W (when using Flatbed) Power Consumption Idle: 4.3 W Interface USB 2.0 High Speed Operating Temperature 5°C to 40°C (41°F to 104°F) Relative Humidity 20% to 80% (non-condensing) Without ADF Input Tray: 468 x 347 x 175 mm…

10, 5. PAPER GUIDE EXTENSION— Extends to hold longer paper. 6. ADF INPUT TRAY— Holds the paper in place to be scanned through the ADF. Adjust the paper width slider for the paper size you are using. 7. ADF (AUTOMATIC DOCUMENT FEEDER)— Comes preinstalled on the scanner lid …

17, When the Setup/Application CD is for several scanner models a. Insert the Setup/Application CD-ROM, included with your scanner, into your CD-ROM drive. Click Run install.exe in the AutoPlay window. b. Click on the Yes button if the User Account Control dialog pops up. Follow the instruction…

47, Some jurisdictions do not allow the exclusion or limitations of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This Limited Warranty gives you specific legal rights, and you may also have other rights that vary from jurisdiction to j…

43, Operating Temperature 5°C to 40°C (41°F to 104°F) Relative Humidity 20% to 80% (non-condensing) Without ADF Input Tray: 468 x 347 x 175 mm (18.43” x 13.66” x 6.89”) Physical Dimensions (WxDxH) With ADF Input Tray: 468 x 347 x 300 mm (18.43” x 13.66” x 11.…

37, Plustek SmartOffice PL806 Alternatively you may click Default to restore the default settings. To turn on the lamp again, simply perform any scanning task. SCANNER LOCK Your scanner is designed with two different lock statuses to protect the optical parts. To ensure the scanner working properly, you have to cho…