ESTeem 195Eg Operation & User’s Manual

30, CHAPTER 3 EXAMPLE APPLICATIONS 5. Verify the encryption settings are correct for the 802.11 AP network in which the EtherStation modem will be working and press the Finish button to return to the configuration page. Revised: 19 Oct 12 3-16 EST P/N AA107E Station Ro…

135, APPENDIX J 195Eg-lp SPECIFICATIONS Antenna Specifications Revised: 19 Oct 12 APX J-8 EST P/N AA107E Model No: AA203ES Caution To comply with the FCC exposure compliance requirements, a separation distance of at least 100cm must be maintained between the an…

62, ESTeem 195Eg CHAPTER 6 SERIAL APPLICATIONS Figure 5: Serial Configuration Screen Data Bits Select the number of data bits on the RS-232 connection to match your serial device. Stop Bits Select the number of stop bits on the RS-232 connection to match your serial device. Parity Select …

63, CHAPTER 6 SERIAL APPLICATIONS Revised: 19 Oct 12 6-5 EST P/N AA107E Flow Control Select the type of data flow control used on the RS-232 connection. The ESTeem can support Hardware flow control (RTS/CTS control lines) or Software Flow Control (XON/XOFF). Select None i…

91, APPENDIX C RADIO CONFIGURATION Revised: 18 Feb 14 APX C-1 EST P/N AA107E 195E FREQUENCIES OF OPERATION In a wireless Ethernet network all of the ESTeem Model 195E’s must be set to the same radio frequency of operation (channel) and bandwidth. The following table shows the channel…

136, APPENDIX J 195Eg-lp SPECIFICATIONS Antenna Specifications Revised: 19 Oct 12 APX J-9 EST P/N AA107E Model No: AA204ES Applications: Fixed base mounting Antenna Type: 2.4 GHz ISM, Directional, 16 Element Yagi, DC Grounded Frequency: 2400-2483.5 MHz Cau…