eTIGER ES-D3A Manual 

7, Standards This product bears the selective sorting symbol for waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European Directive 2002/96/EC in order to be recycled or dismantled to minimize its impact on the environme…

3, Installation - Open the case and remove the battery activation strip. - Mount the sensor on the door and the magnet on the door frame. - Make sure the magnet is placed above of the transmitter. - Mount the magnet max. 1cm away from the transmitter and secure the transmitter and magn…

5, PCB Layout LED indicator Jumpers for zone setup A23 12V Battery Tamper switch Infrared sensor: Detects the infrared rays released by human body motion. Do not touch the surface. Keep the surface clean. Tamper switch: When the alarm system is armed, the tamper switch will trigger the alarm i…

2, eTIGER ES-D3A Box Content 1 x Door / Window Contact 1 x User Manual Transmitter Magnet Images, illustrations and text are non-contractual. ETIGER and the ETIGER logo are registered trademarks and the property of ETIGER. Copyright © 2015 ETIGER. All rights reserved. …

4, To check if the registration is complete, arm the system and separate the magnet from the transmitter again by opening the door or window on which it is installed. If the siren rings out, the registration is successful. …