Ganz ZN-DT350VE Quick Installation Manual

1, 2010/2‐1 1 ZN-DT350VE/ZN-DNT350VE/ZN-DWNT350VE Quick Installation Guide This manual has been designed to guide you through basic settings of your IP devices, such as installation and configuration for using them. Step1. . Assemble and install IP device Manual adjustment …

2, 2010/2‐1 2 Step2. Connect cables to IP device Connect each cable to the device. To see the correct positions of all connectors, refer to the following image below. Step3. Set up network environment The default IP address of your IP device is 192.168.XXX.XXX. …

3, 2010/2‐1 3 STEP4. View video on web page View the live video on a web page using your IP device and its IP address. To have the correct IP address ready and use it on a web page: 1. Convert a MAC address to an IP address. (The MAC address is attached on the sid…

4, 2010/2‐1 4 5. Wait for a few seconds while the web page loads. The live video is displayed as below. 6. If the live video is not displayed and “Can not Create XMLDOMDocument Install MSX ML4.0” message is shown as below, please download and Instal…

5, 2010/2‐1 5 Step5. Setting IP Address To set up the Network conf iguration: 1. Click Setup on the upper right of the web page. The login page is displayed as below. 2. Enter the default user name (root) and the default password (pass), and then select OK. 3. C…

6, Ganz ZN-DT350VE 2010/2‐1 6 Advanced setup (ZNS-GIT IPAdminTool) ZNS‐GIT IPAdminTool is a utility program for IP products. Following list shows a part of features that ZNS‐GIT IPAdminTool provides. z Configure IP address, Subnet mask and Gateway z Shows network related information s…