Gasmate BBQ 1010 Operation & User’s Manual

4, Gasmate BBQ 1010 4 5 GENERAL ASSEMBLY Connecting & Disconnecting to the gas source Familiarise yourself with the general information and safety guidelines located at the front of this manual. Check: 1. The cylinder is lled. A sloshing sound will be heard when shaken. 2. The burner contro…

8, 8 9 CLEANING THE BURNER Follow these instructions to clean and/or replace burners. 1. Turn gas off at control knobs and gas cylinder. 2. Remove cooking grates and grease tray. 3. Remove screw at end of burner using a screwdriver. 4. Carefully lift each burner up and away from …

9, 8 9 ASSEMBLY INSTRUCTIONS 1．Side shelves * There are 2 screws already Pre-assembled on each side * Loosen then hang the side shelf on these 2 screws on each side * Assemble 2 M6X15 screws as shown on each side * Tighten all screws 2．Side shelves can be folded down b…

5, 4 5 IMPORTANT • Do not smoke when attempting to ignite the barbecue. • Never use volcanic rock, heatbeads or other material. • Always use protective gloves when handling hot components. • Note: If for some reason, ignitor fails to produce a spark at th…

6, 6 7 IMPORTANT • The hood must be in the open position for lighting. • Do not leave the barbecue unattended when alight. • Never use all burners on high at the same time when cooking with the hood down. • Clean your barbecue after each USE. DO NOT use abr…

3, 2 3 Always keep cylinder in an upright position. Always close the cylinder valve when the barbecue is not in use. Do not subject the cylinder to excessive heat. Never Store your Gas Cylinder Indoors. If you store your barbecue indoors, ALWAYS disconnect the cylinder rst and st…