H3C MSR 930 Installation Manual

31, 24 When the router configuration must be saved and you have a console cable, you can log in to the router through the BootWare menu. For more information, see "User password loss." Scenario 2 Symptom After the configuration is modified, the network connectivity is lost. When you ch…

5, Technical support [email protected] http://www.h3c.com Documentation feedback You can e-mail your comments about product documentation to [email protected]. We appreciate your comments. …

4, H3C MSR 930 Network topology icons Represents a generic network device, such as a router, switch, or firewall. Represents a routing-capable device, such as a router or Layer 3 switch. Represents a generic switch, such as a Layer 2 or Layer 3 switch, or a router that supports Layer 2 forwarding…

10, 3 Installation tools Accessories provided with the router • Power cord • Console cable • Ring terminal User-supplied tools and equipment • Phillips screwdriver • Flat-blade screwdriver • Wire-stripping pliers, needle-nose pliers • Screws with various specif…

41, 34 LED Location Status Descri p tion WWAN Front panel Off No link is present or no 3G network is available. Steady green The router has been connected to the wireless network and is operating in 3G mode. Flashing green (8 Hz) Data is being received or transmitted. The router is operati…

29, 22 No response from the serial port If the serial port does not respond, verify that the serial cable is in good condition and the serial port settings are correct. Password loss User password loss If you lose your password, you cannot enter the system. In this case, you can boot t…