ACR Electronics NAUTICAST2 - REV A Operation & User’s Manual

69, User Manual 68 Y1-03-0218 Rev A c) Changing the MMSI / IMO Numbers This screen provides a means to change the MMSI and IMO Numbers; the input fields are limited to a maximum of 9 characters. Dynamic Keys: Change MMSI / IMO [M5] [Save] Save MMSI/IMO Number Input…

40, User Manual 39 Y1-03-0218 Rev A ALR – Reading Incoming Alarms: ALR: Information Time 17:36 Date 11/26 (mm.dd) POS 01/1 Message Type ALARM Alarm ID 30 Status [!] Valid alarm, requiring action N 1 o 27' E 0 o 21' |1>0.10|2>1.30|3>1.80nm …

38, ACR Electronics NAUTICAST2 - REV A User Manual 37 Y1-03-0218 Rev A Inbox History: Message and Alarm Types and Status Definition: ASRM*13:42 HIGH WINDS IN AREA! 5004 Addressed Safety Related Message, unacknowledged by recipient, arrived at 13:42, with text “High winds in area!” from ves…

56, User Manual 55 Y1-03-0218 Rev A This screen appears if the new User Passwords are mismatched - i.e. the New User Password and the Repeated New User Password are not identical. In this case, it is possible to re-input both the New and Repeated User Passwords again. [Exit] takes …

12, User Manual 11 Y1-03-0218 Rev A Service Menu Example: Service Password Menu Example: Enter the new Password: Then push Enter (M5). Repeat the new Password: Then Push Enter (M5). A minimum of 4, a maximum of 8 characters are allowed. Should the new password include num…

7, User Manual 6 Y1-03-0218 Rev A 1.3 Entering Ship Settings Select from the Main Menu “Ship Settings” Menu is USER password protected with default password “NAUT”. Enter Password and use the up and down arrows to edit Ship Settings then press Enter or …