Heatrae Sadia HSD-90103 Instruction Manual

2, These notes must be read before installation These instructions are for your safety. Please read through them thoroughly before use and retain for future reference. Failure to follow them could cause injury and/or property damage. Safety Instruction This appliance is not intended…

6, Fig. 2 2. Install The Body Drier without plug-connected wire 1. Follow the above points 1 - 5. 2. Connect the mains cord the terminals. Technical Information Wall-mounted Body Drier Model: HSD-90103 Rated Voltage: 220-240V~ …

8, electronic equipment containing more than agreed levels of lead, cadmium, mercury, exavalent chromium, polybrominated biphenyl (PBB) and polybrominated diphenyl ether (PBDE) flame retardants. Please read the following carefully ACL Group (Intl) Ltd. and/or it’s distributor has…

3, property deriving from failure to comply with the above recommendations, or improper use of the drier. INTRODUCTION Thank you for choosing this Body drier. This product is designed to meet the most stringent quality, performance, and safety requirements. This guide aims t…

5, FIXINGS SUPPLIED 2 x Wall plug 2 x Screw 1 x Hanger PARTS SUPPLIED 1x Body drier unit INSTALLATION IMPORTANT MOUNTING INSTRUCTIONS 1. When wall mounting the product, always check that there are no water, gas or electrical cables/pipes within or behind the wall. 2. E…

1, Heatrae Sadia HSD-90103 Instruction Manual Wall-Mounted Body Drier HSD-90103 User Manual – Please read and retain for future reference. …