Acroprint ES900 Operation & User’s Manual

53, Acroprint ES900 ES900 User’s Manual 47 External Time Signal/Built-in Buzzer This optional feature identifies work start and stop times. Connection Specifications for External Time Signal Contact: • Contact Output: Dry Contact • Contact Capacity: 5A, 30 VDC (Resistive) Example 2: The time table program is expl…

67, ES900 User’s Manual 61 WALL MOUNTING 1. Install the supplied wall-mount screws by using the template. Refer to Install Wall-Mount Screws below. Install Wall-Mount Screws 2. Open the unit. Refer to “Open Unit” on page 3. 3. Hang the unit on the wall and install Wall Mount Brackets. Refe…

32, 26 Change the Date 1. In this example, press CHANGE until the date is "02". Refer to DST on page 22. 2. Press SET. 3. The "Ending Date" of the display changes from flashing to steady and the S mark is displayed under "SU". Numbering Print In this setup, you can…

41, ES900 User’s Manual 35 Setting the 1st Command Line 1. Press SELECT until the S is under the "COMMENT" mark. 2. The flashing digit indicates "Character Position". 3. Press SET. Set 1st Character Code 1. The flashing digit changes from "Character Position&q…

51, ES900 User’s Manual 45 4. In this example, press CHANGE until the option is "2A" (HH:MM). Refer to Comment Lines below. 5. Press SET. Comment Lines C HARACTER POSITION 12345 C ODE 28 01 27 01 2A M EANING Date SPACE Month SPACE HH:MM …