GoMax Electronics CV-117 Operation & User’s Manual

5, GoMax Electronics CV-117 3 HARDWARE INSTALLATION 1. Connect one of the CV-117 to your DVI source. 2. Connect the other CV-117 to your DVI display. 3. Make sure the CAT-5/5e/6 cable is tightly connected between the DVI source and the display with the CV-117. 4. The installation is done. CON…

7, 5 NOTICE 1. The CV-117 may not be compatible with the DVI sources and displays that feature resolutions not in the aspect ratio of 4:3, 16:9 and 16:10. 2. All DVI over CAT5 transmission distances are measured using Belden 1583A CAT5e 125MHz UTP cable and ASTRODESIGN Video Signal G…

3, 1 INTRODUCTION The CV-117 DVI Passive Extender over Single Cat.X DVI Passive Extender over Single Cat.X extends your PC DVI transmission distance up to 30m (100ft) with resolution 1024x768 @60Hz. With CV-117, users can transmit high quality digital video of PC applications t…

6, 4 DVI OVER SINGLE CAT5 SERIES LINEUP CV-15 CV-17 CV-117 CV-117E WP-117A Output to display HDMI DVI DVI DVI DVI Transmission over CAT5 at 1024x768@60Hz 25m [80ft] 60m [200ft] 25m [80ft] 25m [80ft] 30m [100ft] Transmission over CAT5 at 1920x1200@60Hz …

4, 2 SPECIFICATIONS Model Name CV-117 Technical Role of usage Transmitter [TX] Receiver [RX] DVI compliance DVI 1.0 HDCP compliance Single-link 165MHz [4.95Gbps] Video bandwidth Up to WUXGA [1920x1200@60Hz] & UXGA [1600x1200@60Hz] Video support 19…

2, The CV-117 DVI Passive Extender over Single Cat.X has been tested for conformance to safety regulations and requirements, and has been certified for international use. However, like all electronic equipments, the CV-117 should be used with care. Please read and follow…