HIOS CLT-AY-61 Operation Manual

2, 1 Thank you very much for your purchase the Transformer Model: CLT-AY-61, CLT-AY-81. Before starting the operation, read this manual to use CLT-AY-61and CLT-AY-81 safely and properly. This manual should be kept and read always. If in case of trouble, confirm the phenomenon’s …

10, 9 ● Timing Chart of Option REV Starting System ●Timing Chart of Option 2WV Starting System …

6, 5 Setting of switches on the PCB Following function ca be selectable by changing the SW on built-in circuit PCB inside of CLT-AY-61 or CLT-AY-81. SW101: You can select the way of starting input: pulse Input (starting is executed by pulse signal) or Reading St…

8, 7 Timing Chart for Pulse input starting system Description T1: 2 seconds or more of interval between ON and OFF of Main Switch must be kept. T2: The proper input time of STARTING signal should be 10 msec to 50 msec. …

11, 10 Notice of using Transformer for Multiple Axes 1. Whenever the multiple axes driver is controlled, each of CLT-AY-61/81 Transformer should be used individually in each sequencer or system side. Simultaneous starting operation or AND execution of FINISH signal should be controlle…