Hirschmann RS20 Reference Manual

71, CLI Commands: Base CLI L2P Release 7.0 05/2011 4.1 System Information and Statistics Com- 71 Signal contact manual setting closed The signal contact´s manual setting is closed. open The signal contact´s manual setting is open. Signal contact operating state closed The signal contact is c…

195, CLI L2P Release 7.0 05/2011 4.9 Device Configuration Commands 195 4.9.32 set garp timer leaveall This command sets how frequently Leave All PDUs are generated per port. A Leave All PDU indicates that all registrations will be unregistered. Participants would need to rejoin in order t…

549, Glossary 549 CLI L2P Release 7.0 05/2011 GARP Multicast Registration Protocol. GMRP provides a mechanism that allows Bridges and end stations to dynamically register (and subsequently, de-register) Group membership information with the MAC Bridges attached to the same LAN segmen…

62, CLI Commands: Base 62 4.1 System Information and Statistics Com- CLI L2P Release 7.0 05/2011 Alignment Errors - The total number of packets received that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but had a bad Frame Check Seq…

347, CLI L2P Release 7.0 05/2011 4.13 SNTP - Simple Network Time Protocol 347 4.13.19sntp client threshold With this option you can reduce the frequency of time alterations. Enter this threshold as a positive integer value in milliseconds. The switch obtains the server timer as soon as the…

459, Hirschmann RS20 CLI Commands: Switching CLI L2P Release 7.0 05/2011 5.5 Redundant Coupling 459 5.5.6 ring-coupling port Configure the Ring Coupling's ports. Possible values are: D control Enter the Ring Coupling's control coupling port in outband configurations. D local Enter the …