Hirschmann RS20 Operation & User’s Manual

9, About this Manual Basic Configuration Release 6.0 07/2010 9 About this Manual The “Basic Configuration” user manual contains the information you need to start operating the device. It takes you step by step from the first startup operation through to the basic settings for operation…

48, Entering the IP Parameters 48 2.6 System Configuration via DHCP Basic Configuration Release 6.0 07/2010 Example of a DHCP configuration file: # /etc/dhcpd.conf for DHCP Daemon # subnet 10.1.112.0 netmask 255.255.240.0 { option subnet-mask 255.255.240.0; option routers 10.1.112.96; } …

87, Protection from Unauthorized Access Basic Configuration Release 6.0 07/2010 6.4 Restricted Management Access 87 6.4 Restricted Management Access The device allows you to differentiate the management access to the device based on IP address ranges, and to differentiate these based on …

215, Operation Diagnosis Basic Configuration Release 6.0 07/2010 9.14 Event Log 215 9.14 Event Log The device allows you to call up a log of the system events. The table of the “Event Log” dialog lists the logged events with a time stamp. Note: You have the option to also send the logged …

125, Network Load Control Basic Configuration Release 6.0 07/2010 8.2 Multicast Application 125 8.2 Multicast Application 8.2.1 Description of the Multicast Application The data distribution in the LAN differentiates between 3 distribution classes on the basis of the addressed recipients: X Un…

208, Hirschmann RS20 Operation Diagnosis 208 9.11 Reports Basic Configuration Release 6.0 07/2010  Click “Download Switch-Dump”.  Select the directory in which you want to save the switch dump.  Click “Save”. The device creates the file name of the switch dumps automatically in the …