Hirschmann RS2-5TX/FX Manual, Description And Operating Instructions

3, Hirschmann RS2-5TX/FX 3 CONTROL DRAWING for Industrial ETHERNET Rail Switch 2 and Rail Transceiver 2 Family According to ANSI / ISA 12.12.01-2012 Rev.: 0 Date: 2012-07-13 Document No.: 000163806DNR Page 1 of 1 NON HAZARDOUS LOCATION P ower Supply: (Redundant: P1, P2) 24 V DC Relay Contacts: Associated Appa…

8, Hirschmann Automation and Control GmbH Stuttgarter Straße 45-51 D-72654 Neckartenzlingen Germany Tel.: +49 (0)1805 14-1538 E-mail: [email protected] Internet: http://www.hirschmann.com Printed in Germany Subject to alterations …

5, 5 1. Functional description The 10/100BASE-T(X) ports of an RS2- 5TX(/FX) represent a terminal connection for the connected LAN segment. You can connect single devices or complete network segments. 1.1 FRAME SWITCHING FUNCTIONS Store and Forward All data received by the RS2-5TX(/FX) from the sy…

7, 7 Radiated emission CFR-47 Part 15 Class A, Warning! This is a Class A device. This equipment may cause radio interference if used in a residential area. In this case the operator may be required to take appropriate measures. Interference proof Discharge of static electricity Contact discharg…

1, Description and operating instructions Industrial ETHERNET Rail Switch The Rail Switches RS2-5TX and RS2-5TX/FX have been especially designed for use in industrial environments. They support ETHERNET 10 MBit/s and Fast ETHERNET 100 MBit/s. The Rail Switch modules support switched E…

6, 6 Notes: – The front panel of the RS2-5TX(/FX) is grounded via a separate ground connec- tion. – Do not open the housing. – The shielding ground of the twisted pair cables is electrically connected to the front panel. 3.3 STARTUP PROCEDURE 䡺 You start up the RS2-5TX(/FX) by connecting the s…