Ikelite 6910.63 Instruction Manual

18, 18 Button(s) or control(s) do not line up • Ensure that nothing is preventing the camera from going into the housing. • Push the camera mounting plate forward until it is ush with the housing base plate. Camera is not functioning normally underwater • Ensure that the camera …

6, 6 MENU Fn START/STOP DISP ISO C2 MENU Fn START/STOP DISP ISO C2 O-Ring Control dial Camera Mounting Plate Control wheel AE/MF/ AEL Flash pop up Fn Custom 2 (C2) Playback Mode dial Menu Start/Stop Control wheel Up/ down/left/ right/center …

13, 13 Setting Up An External Strobe About the Built-In Flash The lens port opening is enlarged to accept a variety of wide angle, zoom, and macro lenses. This larger lens port opening blocks a signicant portion of the camera’s built-in ash, making it unusable to light a subject underwat…

5, Ikelite 6910.63 5 Getting to Know Your Housing Shutter button Power ON/OFF Custom 1 (C1) Electrical bulkhead Fiber optic ports Tray mounts Lens port mount Lid snap Lens release …

12, 12 4. The ON/OFF camera knob has a White Dot. To turn camera ON, lift knob and rotate White Dot to the 10 o’clock position from the back of the housing. Lower and then rotate knob slightly clockwise to turn camera ON. DO NOT continue rotating knob once camera is activated or…

2, 2 About this Product Thank you for your purchase of Ikelite equipment. Please read this instruction manual completely before attempting to operate or dive with this product. Please visit ikelite.com to register your product to receive information on any updates, notices, or recalls pertaining t…