HITEC power peak D7 Operating Instructions Manual

10, 10 MENU STRUCTURE The Memory Name menu is where the parameters for charging or discharging batteries are dened. The corresponding settings are then stored in the memory. (See Page 14 for setting process parameters) The Data View menu displays information pertaining to the charging and disc…

13, HITEC power peak D7 13 CHARGE CURRENT (Chg Current) Press the + button to move the arrow to the charge current prompt. Press the START/ENT button to highlight the value prompt. Use + or – to increase or decrease the charge current. Press START/ENT to conrm. NEVER EXCEED THE DISCHARGE CURRENT …

12, 12 Warning BEFORE SELECTING A PARAMETER OPERATION, IT IS CRITICAL THAT YOU KNOW THE TYPE OF BATTERY YOU ARE WORKING WITH AND WHAT THE MANUFACTURER RECOMMENDATIONS ARE FOR CHARGING OR DISCHARGING. FAILURE TO FOLLOW THE MANUFACTURERS RECOMMMENDATIONS CAN RESULT IN DAMAGE TO THE BATTERY AND POSS…

4, 4 A Never place a charger on a car seat, carpet or similar surface. Keep all ammable volatile materials away from the operating area. A Make sure you know the specications of the battery to be charged or discharged to ensure it meets the requirements of this charger. If the program is s…

15, 15 BATTERY TYPE OPERATION OPERATION DESCRIPTION LiPo, LiFe, Li-ion Charge The charge mode is for charging LiPo/LiFe/LiIon/ LiHV batter- ies in normal mode. Discharge This mode is for discharging LiPo/LiFe/LiIon batteries. Storage This program is for charging or discharging a lithium battery wh…

17, 17 This shows what information is available while charging a Lithium type battery. The information is displayed across two screens. Pressing the START/ENT button takes you to a display of the voltage curve line, pressing it a second time takes to the cell balance screen. Press and hold the …