Lantech HR-114 II Operation & User’s Manual

20, 18 User Guide 19 . Remote Management from Internet – To manage the Broadband Router from a remote location (outside of the local network through WAN port), it must specify the IP address of the remote PC, otherwise, leave the IP address 0.0.0.0, means all legal IP address can…

11, HR-114 II 1 WAN 4 LAN Broadband Router HR-114 II 1 WAN 4 LAN Broadband Router 10 User Guide 11 1. In the “Local area network status” window, click on “Properties.” 2. In the “Local area network connection” window,  rst select TCP/IP setting and then select “Pr…

17, HR-114 II 1 WAN 4 LAN Broadband Router HR-114 II 1 WAN 4 LAN Broadband Router 16 User Guide 17 user’s need to save the cost of connection fee from ISP provider (default time=0, always connect). Click on the Connect-on-demand button to dial up to the ISP when only on demand, while…

29, HR-114 II 1 WAN 4 LAN Broadband Router HR-114 II 1 WAN 4 LAN Broadband Router 28 User Guide 29 Example: ID Trigger Port Trigger Type Public Port Public Type Comment 1 28800 UDP 2300-2400, 47624 UDP MSN Game Zone 2 28800 UDP 2300-2400, 47624 TCP MSN Game Zone 3 6112 UDP 6112 UD…

8, Lantech HR-114 II 6 User Guide 7 • WAN – In the four port broadband router, there is an RJ-45 10/100Mbps Auto-MDIX port for the WAN that will  t the xDSL/Cable modem’s speci cation need. • LAN (1-4) – Four RJ-45 10/100Mbps Auto-MDIX ports for connecting to either 10Mbps or 100Mbps Ethernet connect…