Huey Chiao HCN600 Operation & User’s Manual

6, 4 4. Charging the Headset HCN600 comes with a Lithium Polymer battery built-in. 1. Plug the travel charger into the power socket. 2. Plug the end of the travel charger into the power interface adapter of the Headset. 3. While charging, the indicator will turn red; when charging is c…

15, 13 can press the decrease (-) volume key for 2~3 seconds to easily transfer the calls between Call 1 and Call 2. ● If Call 1 is maintained and Call 2 is on line, quickly press the function button to end Call 2 and renew Call 1. 19. Adjusting the Volume During a call, you may adjust the H…

23, 21 communications. However, there is no guarantee that interfer- ence will not occur in a particular installation. If this equip- ment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is…

17, 15 Weight 60 g (battery included) Size 166x172x51 mm Safety Regulation CE, FCC, BQB 22. Excluding Problems 1. The Headset ashes the red indicator light: The battery is low, please recharge your Headset. 2. If after recharging for 20 minutes, the Headset does not turn on: For initial use, …

8, 6 5. Please choose and conrm HCN600. 6. Key in the Headset Password “0000” and press YES. If the pairing is successful, the indicator turns to ash the blue light only. For some mobile phones, after pairing you may have to select and conrm HCN600 again to start the connect…