Adaptec 2010S - SCSI RAID Storage Controller Installation Manual

16, 1-9 Introduction Safety Information Any device that uses electricity must be treated with caution. To ensure general safety: ■ Keep your work area and the computer clean and clear of debris. Eliminate hazards such as spills or bad wiring. ■ Before opening the system cabinet, unplug the p…

15, 1-8 Adaptec SCSI RAID 2010S/2015S Installation Guide Storage Management Software Overview Adaptec supplies a number of software applications for setting up and managing RAID arrays with the Adaptec ZCR. One is a Graphical User Interface (GUI), one is a Command-Line Interface (CLI) that …

37, 3-10 Adaptec SCSI RAID 2010S/2015S Installation Guide Installing the Controller in an Existing Linux System Adding the controller to an existing system is essentially the same as if the system were new. Data on any hard disk drive attached to the SCSI channels that will be controlled …

17, Adaptec 2010S - SCSI RAID Storage Controller 1-10 Adaptec SCSI RAID 2010S/2015S Installation Guide To prevent ESD damage: ■ Always use an ESD wrist or ankle strap and ensure that it makes skin contact. ■ Connect the equipment end of the strap to an unpainted metal surface on the chassis. ■ If no wrist strap is available, gr…

1, INSTALLATION GUIDE A DAPTEC SCSI RAID 2010S/2015S R2N2 RAID IG.BOOK Page 1 Monday, September 9, 2002 12:01 PM …

40, 4-1 4 Installing Storage Management Software In this Chapter As described in Storage Management Software Overview on page 1-8, you can use Storage Manager as your primary RAID management utility. ➤ System Requirements 4-2 ➤ Installing Storage Manager 4-3 R2N2 RAID IG.BOOK P…