MadBoy Thunder Operation & User’s Manual

10, The insert is a break point in the input channel signal path, It allows the signal to be taken out from this , through an external equipment such as a Limiter,Compressor,Equalizer, Effector,and then back to the , the input jack can be used with phone jack,the signal will be send out through TIP …

7, Specifications ●AC input voltage AC 115V 60HZ AC 230V 50HZ............................................................. / ●Audio output power 250W peak to peak THD 10......................................................... = % ●AV1 audio input sensitivity 500mV..............…

11, 3.Connecting to a DTS Receiver/Decoder Using either an RCA-ended COAXIAL cable suited for digital audio use or an OPTICAL cable, connect one end to the appropriate jack on the (COAXIAL or OPTICAL) and the other end to the appropriate jack (COAXIAL or OPTICAL). If you have both coaxial and optical in…

27, Using the Remote Control When operating the remote control, point the top of the remote control toward the 's remote sensor on the front panel and ensure that there is a clear line of sight between the remote control and void of obstacles in order to prevent signal deflection. THUN…

16, MadBoy Thunder Example: Selecting a Title and Chapter Jumping to title 2 and chapter 2 1.Press the TIME button until TITLE “__ / __ CHAPTER __ / __ “ appears on the top of the TV screen 2.Press 2 on the number pad to select Title 1. Now chapter will be highlighted 3.Press 2 on the number pad to …

31, Troubleshooting 1.There is no power Make sure the power cord is firmly connected to the back of the● and to the power outlet If using a power strip/surge-protector, make sure that it is plugged in and switched on● Make sure the Power button on the front panel is pushed in to t…