Adaptec AAR-1220SA Manual, Release Note

1, -------------------------------------------------------------------------------- Updated Release notes for the AAR-1220SA, AAR-1225SA SATA HostRAID dated: December 19, 2007 -------------------------------------------------------------------------------- This release notes contains the foll…

2, Netware Driver - 1.6-0 Build 12082 - Netware 6.5 SP5 (No Port Multiplier support under Netware) 3.1 Adaptec Storage Manager: --------------------------------- Adaptec Storage Manager and HRCONF - 5.10.0 Build 17173 Supp…

3, Adaptec AAR-1220SA 2. Before rebooting the system,, make sure to initiate and fully complete the clear operation in the BIOS-ACU on the RAID array which resides on the SIL 3726 Port Multiplier. 3. Boot CD will not boot successfully on certain Intel chipset models like Q965. In such cases, the user needs…

4, WARNING: Altering or adding these driver parameters incorrectly can render your system inoperable. Use them with caution. Follow the instructions below to enter registry values that affect the configuration information for the ADP3132 driver. Note that all HostRAID adapters supported…

5, Follow these steps to change the settings: 1) Select Run from the Start button. 2) Browse to the folder containing above mentioned version of the HostRAID driver, select file "HIGHPERF.REG" or "WHQL.REG" and click OK. NOTE: The default value for this parameter is …

6, 9. Linux Specific COMMAND LINE OPTIONS: ------------------------------------------ User options: Queue Depth setting per lun Command line parameter passes in via insmod: #insmod <ModuleName>.o hr_user_cmd_per_lun=<QueueDepthValue> Example: #insmod adp3132.o hr_user…