Adaptec AWN-8084 Operation & User’s Manual

28, 21 Setting Up Your Network Stations Setting Up Your Network Stations Before you continue, ensure that you have: ❏ Followed the tips and suggestions provided in Before You Begin... on page 9. ❏ Selected the setup for your Wireless Router that is most appropriate for your existin…

55, 48 Using the Advanced Router Functions Using the Advanced Router Functions Note: This section of the User’s Guide provides detailed information about your Wireless Router’s advanced functions, and assumes that you have advanced knowledge of routers and networks. You can use your Wir…

54, 47 Changing the Setup of Your WLAN Filtering MAC Addresses You can control which wireless stations can connect to your Wireless Router by enabling MAC address filtering. To enable and set up MAC address filtering: 1 Open the Utility and log in. (See page 22.) 2 Click Wireless (802.11) under Basi…

13, 6 Getting to Know Your Wireless Router This is Your Wireless Router Top View The top of your Wireless Router has five clearly labeled status indicator lights (or LEDs). Once your Wireless Router is installed and the power is on, these LEDs indicate the status of your network, as described…

72, 65 Glossary IP Address An Internet Protocol (IP) address is a number sequence that’s used to identify a computer that’s connected to your network through TCP/IP. IP addresses are made up of four numbers separated by periods, such as 192.168.8.1. IP address pool (IP pool) The IP poo…

32, Adaptec AWN-8084 25 Configuring Your Wireless Router Configuring Your Wireless Router Before you continue, ensure that you have: ❏ Followed the tips and suggestions provided in Before You Begin... on page 9. ❏ Selected the setup for your Wireless Router that is most appropriate for your existing o…