King gates Couper 24 Instruction Manual

7, King gates Couper 24 4A - INTRODCTION Read the instructions with care before installing the product. The producer disclaims all responsibility for any damage or bad functioning caused by non-observance of the instructions or bad connection that may result in poor safety and functioning of the gear-motor. 4B…

2, 1A - WARNINGS 1B - AVAILABLE VERSION 1 - GENERAL DESCRIPTION Unfulfilment of the below listed direction will release the KING gates srl, from any responsibility for damage caused to people or things. -Do not modify the product in any part. -To optimize the functioning of the automat…

5, 3A - HOW TO USE A GRAPH 3C - GRAPH Measure "E", and draw a horizontal line in graph at the read measure. Choose a point on the drawn line, considering the desired opening angle, suitable to the column. Draw a vertical line from that point and determinate the A value. Verify…

9, 6A - CONNECTION TO THE POWER STATION To connect the gear motor to the control unit, proceed as follows: 01. Remove the lid of the gear motor as shown in fig. 12; 02. Slacken the gearmotor cable clamp, thread the connecting cable through the hole and connect the three electric wires 03…

3, 1A - WARNINGS 1B - AVAILABLE VERSION 1 - GENERAL DESCRIPTION Unfulfilment of the below listed direction will release the KING gates srl, from any responsibility for damage caused to people or things. -Do not modify the product in any part. -To optimize the functioning of the automat…