Kino Flo tegra 4bank dmx Operation Manual

8, Ballast Operation WARNING! 1) ALWAYS TURN OFF THE BALLAST BEFORE connecting or disconnecting Lamps, Harnesses or Extension Cables. 2) Use only with Sine wave inverters. Do not operate on SCR dimmers. 3) If powering the ballasts through a Dimmer Pack, set the Dimmer to Non-Di…

15, 15 Cases KAS-C46 KAS-54L KAS-KFC BAG-201 Part Number Description Dimensions Weight (Empty) Holds BAG-201 2ft 4Bank Soft Case 28.5 x 7.5 x 20” (72.5 x 19 x 51cm) 3.5 lb (2kg) 2ft 4Bank System (1), Lamp Case BAG-401 4ft 4Bank Soft Case 55 x 8 x 19.5” (140 x 20.5 x 49.5cm) 6 lb (3kg…

11, 11 White Black White Black For example: If the 4Bank DMX base address is set at 001, the conguration below will provide 4 lamps individually addressable through DMX 512. DMX Addressing Push the tabs above or below the number window to set the address. (Valid addresses r…

10, Manual Operation The Ballast operates remote from the xture. Connect the Extension cable to the Ballast and the Lamp Harness. After the lamps are properly installed, the Ballast can be turned on. Each switch controls one lamp. The color bands on the lamp harness correspond to th…

7, Kino Flo tegra 4bank dmx 7 Other Fixture Mounting Options Extension Cable The grommet holes along the edge of the xture are designed to allow the xture to be screwed onto set walls. To insert the cable, position the logo up to align the key ways on the extension cable with the circular receptacle on the ballas…

2, 2 Systems CFX-484 4ft 4Bank Fixture w/ Louver/HP, 90° CFX-244 2ft 4Bank Fixture w/ Louver/HP, 90° MTP-KF41 Kino 41K Mount w/ 3/8” Pin (10mm) X16-25 4Bank Extension, 25ft BAL-457-120U 4Bank DMX Ballast, Univ 120U BAL-457-230U 4Bank DMX Ballast, Univ 230U …