Mase IS3501 Installation Manual

10, IMPORTANT The control panel is necessary for operating the unit and must be installed; use of a non-Mase control panel could present compatibity problems. Make the connections with the battery disconnected. CAUTION The control panel is provided with a connecting cable 10 metres long.…

7, Mase IS3501 1 Diesel return 2 Diesel Fig. 10 2 2.4. Components 1 - Raw water intake 1/2" IMPORTANT If the unit is installed more than 40" above the water- line, a check valve should be fitted after the sea intake (fig. 6, ref. 1) to prevent the raw water circuit emptying when the motor is off. If th…

3, 1.0. INSTALLATION 1.1. Installation space requirements The generator must be installed in a space sufficient to supply the necessary air for combustion of the engine. The air needed for combustion is taken in through the opening on the base so care must be taken to ensure that this opening is not…

4, IMPORTANT Do not apply any type of external sea strainer over the raw water pick-up. THE DIRECT INFEED SYSTEM SUPPLIED BY MASE HAS BEEN MODIFIED TO PREVENT SOLID OBJECTS FROM ENTERING AND BLOCKING THE SYSTEM. IF A NON-MASE COMPONENT IS USED, MORE CARE AND MORE FREQUENT CLEANING IS NECESSARY. The b…

8, 2.5. Drainage system The exhaust system of the generator must be separate from that of the main engine(s) IMPORTANT The length of the hose from the highest point of the drain duct to the muffler should not exceed 80". This is to prevent the water left in the drainage hose returning to the…