Jammin Pro studiomix 10 Operation & User’s Manual

2, The symbol is used to indicate that some hazardous live terminals are involved within this apparatus, even under the normal operating conditions, which may be sufficient to constitute the risk of electric shock or death. The symbol is used in the service documentation to indicate…

6, Jammin Pro studiomix 10 1.2 The user’ s manual The user’ s manual is designed to give you both an overview of the controls, as well as detailed information on how to use them. 1.3.1 Shipment 1.3 Before you get started Your mixing console was carefully packed in the factory to guarantee safe transport. Nevert…

10, The FX SEND connector outputs the signal you picked up from the individual using the FX controls. You can connect this to the input of an external effects device order to process the FX bus master signal. Once an effects mix is created, the processed signal can then be routed from th…

9, The PAN control determines the position of channel signal within the stereo image. This control features a constant-power characteristic, which means the signal is always maintained at a constant level, irrespective of position in the stereo panorama. PAN The LEVEL control determi…

11, 8 If the connected effects processor receives no input signal. the FX SEND control is probably too low. This also goes for the built-in effects processor. Adjust your external effects processor to 100% wet (effects signal only), before the effects signal is added to the main mix along with “dry�…