hopf 6842 Manual, Technical Description

47, hopf 6842 DATA STRINGS GPS Satellite Clock 6842 - Ver. 08.00 Page 47 6.7 Data String IBM 9037 Sysplex Timer This data string is used to synchronise the IBM 9037 Sysplex Timer. The 9037expects the time at its output every second. The following settings are required: 9600 baud, 8 data bi…

41, DATA STRINGS GPS Satellite Clock 6842 - Ver. 08.00 Page 41 6.3.1 Status in the Data String SINEC H1 The characters 28-31 in the data string SINEC H1 give information about the synchronisation status of the clock. meaning of the following: character no.:28 = "#" …

49, DATA STRINGS GPS Satellite Clock 6842 - Ver. 08.00 Page 49 6.9 SINEC H1 Extended The control characters STX and ETX are transmitted only if the output is set "with control char- acters". Otherwise there are no control characters. In case of the setting "ET…

37, CONFIGURATION GPS Satellite Clock 6842 - Ver. 08.00 Page 37 5.4 Data Format of the Serial Transmission The data are transmitted as BCD values in ASCII and can be displayed by every terminal pro- gramme (e.g. TERMINAL.EXE under Windows). The following control charact…

23, KEY-PAD GPS Satellite Clock 6842 - Ver. 08.00 Page 23 Both viewing and altering the time is carried out in the same display screen by means of the fol- lowing call-up: TIME-OUT FOR DCF- SIMULATION Y/N Entering "Y" calls up the display screen. DCF-SIM STOP AFTER …

24, KEY-PAD Page 24 GPS Satellite Clock 6842 - Ver. 08.00 4.4.4 Time Decoding 3D / Position fix The accuracy of the time decoding depends on how accurately the position of the operational location is calculated. At least 4 satellites are required (3D decoding). From the cal…