Iqinvision IQeye 040S Quick Install Manual

1, IQeye 4 Series ™ IQeye 040S, 041S and 042S Quick Install Guide When you can’t afford to miss a thing. ® Part of the IQeye Basic Line of Network Surveillance Products …

2, Plug the IQeye camera into the network. The IQeye 040S, 041S and 042S cameras are powered via the Ethernet using an IEEE 802.3af power source. Power Source Warning: Note that your IQeye 4 Series camera can only be powered with a standard IEEE 802.3af PoE injector or PoE switch. It CANN…

3, IQeye 4 Series field of view and focus adjustment must be performed using a browser to view the camera image. Insert the IQtools CD into the CD drive of the PC. Once the CD autostarts, you can either run IQfinder right off the CD by clicking the “Scan for IQeye cameras on my network”…

4, Click the “Scan for IQeye cameras on my network” button to find IQeye cameras. The detected cameras will be displayed in the IQfinder window. Highlight a camera from the list and click the “Edit” button to edit the selected camera’s IP settings. 4. …

5, The Edit window allows the Name, IP address, Subnet, and Gateway of the camera to be changed. It also allows the cam- era to be configured for DHCP. Click the “Apply” button after making the desired changes. Note: Changing between a static IP address and DHCP will require the camera to b…

6, Iqinvision IQeye 040S To perform further configuration of the camera click on the “Setup” tab. Note: The default username is “root” and the default password is “system”. For further information see the IQeye documentation on the installation CD or at http://www.iqeye.com. IQinVision, Inc. 3312…