jobmate JM1000RHD Safety And Operating Manual

8, jobmate JM1000RHD 8 7. CHISEL FUNCTION 1. Adjust the hammer and chisel action selector to position “ “. (See Fig. G1) 2. Adjust the hammer and drilling action selector to position “ “. (See Fig. G2) 3. You are now set up for chisel work using chisel action. NOTE: Press the selector…

2, 2 GENERAL POWER TOOL SAFETY WARNINGS WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term “power tool” in…

4, 4 1 2 3 4 5 7 6 8 9 10 11 COMPONENT LIST 1. Locking sleeve 2. Hammer and chisel action selector 3. Grease box cover 4. On/off Switch 5. Hammer and drilling action selector 6. Auxiliary Handle 7. Depth gauge 8. Grease box cover spanner 9. Dust cover 10. SDS Chisel bit x 2* (1 Flat chisel,…

7, 7 2. Adjust the hammer and drilling action selector to position “ “. (See Fig. E) 3. You are now set up for hammer drilling into masonry. NOTE: Press the selector switch lock button before adjusting the dial selector everytime. 6. DRILLING FUNCTION 1. Adjust the hammer and chisel action s…

5, 5 ACCESSORIES Auxiliary handle 1 Depth gauge 1 Dust cover 1 Spanner 1 Plastic container grease 1 SDS drill bits (8/10/12X150mm) 3 SDS Chisel (flat & pointed 250mm) 2 We recommend that you purchase your accessories from the same store that sold you the tool. Refer to th…