IVIEW CZ-50X Operation & User’s Manual

5, IVIEW CZ-50X 5 1.2 Specifications Video Signal System NTSC PAL Camera CCD 1/4〞Interline Transfer CCD Max. Pixels 811(H)X508(V) 795(H)X596(V) Horizontal Res 500TV Line(Color), 570 TV Line(B/W) S/N Ratio 50Db(AGC off) Zoom X10 Optical Zoom, X10 Digital Zoom …

26, 26 Color mode: suit for daytime. Auto mode: change day and night mode automatically according to the environment illumination. Auto 1 is faster than Auto 2. (4) Synchronous mode: internal, unchangeable. (5) Image adjustment. Freeze: Camera starts freezing the image of start point, a…

9, 9  Select the appropriate protocol with DIP switch combination. Switch State Protocol Pin No Pin 1 Pin 2 Pin 3 Pin 4 Protocol OFF OFF PELCO-P ON OFF PELCO-D OFF ON Auto ON ON Reserved Baud rate OFF OFF 9600 ON OFF 2400 OFF ON…

17, 17 4.2.4 Patterns 4 Patterns are supported, please refer to below details: <PATTERN NUMBER>：Set Pattern number (1~4). <PROGRAM PATTERN>: Pattern scan program. <CLEAR CURRENT PATTERN>：Deletes data in current pattern. 1．Pattern Number （1…

8, 8 Protocol: Pelco-D. 2.2.1 Camera ID Setup  The range of ID is 0~255. Factory default of Camera ID is 1.  ID number of camera is set using binary number. The number from 1~8 present 1, 2, 4, 8, 16, 32, 64, 128. For example, switch 1, 3, 5, 7 to “ON” position, the corr…

20, 20 Alarm : On/Off Region：1~4 Region Mode: On / Off 5.Focus Setup 1 Mode：Auto, Manual, One-off Auto focus. Press “Iris Open” to enter sub-menu. One-off auto focus: Once the image zoom changes, the camera will automatically focus and fix the status till the image change ag…