Kaba E-Plex 5X10 Installation Instructions Manual

18, 14 M. RESET FUNCTION Warning: When the lock is reset, all existing authorization and access codes are deleted, and the lock is configured to the factory default lock settings. The master code becomes 1,2,3,4,5,6,7,8. If the Master Code is lost or forgotten and the number has not …

2, 2 TABLE OF CONTENTS Assembly Drawing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Tools Required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .…

4, 4 TOOLS REQUIRED • Safety glasses • Electric drill (variable speed) • Awl or center punch • 2 1 ⁄8" (54 mm) hole saw pilot drill • 3 ⁄8" (25 mm) hole saw pilot drill • Hammer • Phillips head screwdriver • Small flat blade screwdriver OPERATIONAL NOTE: The E-Plex Exi…

10, Thank you for purchasing our product. In order to protect your investment and to enable us to better serve you in the future, please fill out this registration card and return it to Kaba Access Control, or register online at www.kabaaccess.com. This lock will be used in what type of facilit…

15, Kaba E-Plex 5X10 11 I-7 Using two pairs of pliers, break the tailpiece to the desired length of the intended application by holding one pair of pliers on the good side of the score mark and a second pair on the other side of the score mark. Slowly move the 2nd pair of pliers up and down until the unneeded portion…

5, 5 A. DOOR PREPARATION - EXIT DEVICE A-1 For New Installations (Existing Installations proceed to Step A-2): For new installations, all mounting hardware for the actual exit device should be acquired from the exit device supplier. All necessary hardware to mount the E-Plex exit trim is inclu…